The Winter season has finally ended, and there won’t be any more falling snow until the following season. At least, that’s what most people hope. It’s about time you store your snowblower in the garage during the summer season. However, this doesn’t really matter as much as how you prepare it for long-term storage.
Knowing how to prepare and store your snowblower in the garage properly is essential. It will help maintain its efficiency and also improve its longevity. To store your snowblower in the garage you have considered essential things such as draining the fuel tank, cleaning, and covering for safety.
Here is a straightforward process on how to store your snowblower in the garage.
Drain the Fuel Tank
Some people still store their snowblowers with fuel in the tank during the summer season. However, the best practice would be to drain all the gasoline, even if you usually use a fuel stabilizer.
Draining the snowblower’s fuel tank ensures you get rid of any water or gum deposits in the engine. Besides, the shelf life of gasoline is extremely short. Therefore, it becomes stale when you leave it for long, clogging up the snowblower’s carburetor in no time. Also, note that it becomes much easier to start your snowblower in the following winter with fresh fuel in the tank.
There are three various ways you can use to drain your snowblower’s fuel tank. These are;
- Running the machine dry, which is also the easiest way to go about it.
- Using fuel lines
- Through a siphon.
Once you’ve drained all the gasoline, you need to run the engine until it stops. This last step is just to ensure that all the gas in the fuel tank has burnt off.
Remember, exposing yourself to gasoline may affect your health. Breathing the BTEX chemical in gasoline may cause throat and nose irritation, dizziness, nausea, headache, breathing difficulties, and vomiting. So, when disposing of your gasoline after draining, ensure you do it safely.
For those who believe it’s perfectly okay to store their snowblowers with gasoline in the tank, please add a fuel stabilizer to it. But, if the snowblower’s fuel tank is low, you can first add a fuel stabilizer to some new fuel before putting it all together in the tank. Also, ensure you run the engine for a few minutes before storing it.
Changing the Engine Oil
Since old oil can’t protect the engine against contamination and rust as the new oil would, it’s necessary that you change it before storage. Remember to also dispose of your old oil safely.
This new oil will prevent all the unwanted elements from building up on the snowblower’s engine. It also ensures the engine remains in good performance shape until the next winter season.
Additionally, you don’t have to add any engine oil to the snowblower. Always read and follow all the instructions on the manual concerning the type and amount of oil you should add. However, a single stage 2 stroke ty of a snowblower needs a fuel/oil mix. So, if yours is the same type, ignore this process.
Check If There Are Any Worn Out Parts That Need Repair
Most people refer to this step as a quality check process. Here is where you need to take your time the most. Inspect all the snowblower parts to see if there are any wear and tear signs or damage that need repair.
You should pay more attention to the snowblower’s belts, spark plug, and friction disks. If possible, please replace your spark plug every winter season for effective functioning. After confirming that the three are in excellent shape, transfer your attention to the impellers and auger. Check for any damage, then finally ensure that all the screws, bolts, and nuts are tightly in place.
Do A Maintenance Check on The Moving Parts
Not putting enough lubrication on the snowblower’s moving parts is one common mistake people commit. First, know that you have to lubricate any moving part constantly to remain in optimal performance shape, whether working or not. Without adequate lubrication, these parts may rust, causing severe damages by the time you want to use the machine again.
Therefore, you need to adequately grease all the moving parts of your snowblower before putting it in the storage until the following on-season. If you’re not sure about which parts to lubricate and which ones not to, refer to the manual for the right directions.
The Engine Need to Be Well Protected
You need to protect the snowblower engine against elements in both its interior and exterior parts before storing it in the garage. This is actually the case with all small engines, not only the snowblower. Therefore, you need to wash it first thoroughly, then seal it well before taking care of its exterior part.
Here is how you can properly seal the engine. First, remove the spark plug to access the engine interiors. Then, take a fogging oil and pour some of it into the combustion chamber. This is to lubricate the piston and the engine cylinder wall. You can also take advantage of this process to clean or replace the spark plug.
Return the spark plug, then pull its starter code about two or three times, or until you feel some resistance on the cord. This resistance tells you that the engine is now well sealed and that you should now concentrate on the outside. Go ahead and apply any oil that will prevent rust formation on the exterior part of the engine.
In case you’re wondering why the engine needs sealing, it’s to prevent moisture from finding its way into the chamber. If it does, it may cause engine corrosion.
Properly Clean the Exterior Part of Your Snowblower
There are usually some salt stains left on the exterior part of your snowblower. You have to ensure you remove it all out before taking this machine in the garage for long-term storage. To do this, use warm soapy water and a clean cloth to wash it. Don’t forget to check on the painted parts to see if there are any chips. Treat them accordingly, if there’s any.
Your snowblower will not rust while in storage by cleaning all the salt stains off the machine and treating any available chips. If there was any rust on the surface before this cleaning process, then it will prevent it from spreading to the other surfaces.
This machine may have been developed to work in cold and wet conditions, but you must never forget to dry it. This is pretty necessary, especially if it’s going to be in the storage for that long, to avoid rusting and wearing out.
It’s Necessary to Do the Last Maintenance Check
People make mistakes, even with things they’ve worked with all their lives. For this reason, there’s a need for you to go through all the maintenance checks illustrated on the user manual to be sure.
Wrap Your Snowblower Well
You have to ensure that you don’t expose your snowblower to dust and dirt before storing it in the garage. This is because a lot of workshop activities do happen in the garage, creating the elements every day. No wonder it’s recommended that you wrap your snowblower well first using the best quality snowblower cover.
You may think that a snowblower cover is expensive, but actually, they’re not. Besides, they’re worth every coin since they’re breathable and can safeguard this machine from scratches.
Compared to a garbage bag or plastic tarp, a snowblower cover is way better. Since the material used is breathable, moisture can’t build up inside in humid temperatures.
Other than the garage, there are other places you can use to store your snowblower during the summer season, including storage sheds and outdoors. However, you’ll still need to take some extra precautions. For instance, besides using a snowblower cover on the machine, you also have to put it on a few blocks to raise it a bit over the grounds.
The best place to store your snowblower is, therefore, in the garage. This is because a garage is warmer and can protect it fully against rain and extreme weather elements.
But, before finally leaving your snowblower in the garage, ensure that there’s no open flames or pilot light such as furnace or gas drier. Otherwise, you risk causing a fire in the garage. Even if you drained all the gasoline from your snowblower, you still need to get rid of such staff. Also, consider getting a snowblower garage mat to protect your garage floor
As mentioned above, there are other places you could store your snowblower when you’re not using it, and you have no space left in the garage. Other than snowblower sheds and outside, you may consider hiring a storage unit.
A suitable storage unit for a snowblower must be flame-free, clean, and dry. It will surprise you how safe, flexible, and also affordable a storage unit is. Storage units also come in different shapes and sizes, so you’ll be picking one that best fits your needs and the size of your snowblower.
Properly storing away your snowblower throughout the off-season will both extend its lifespan and also maintain its excellent performance. Now that you know how to store your snowblower in the garage properly, you can now keep it safe and sound until the snow starts to fall again. Also, this can save you a good amount of cash in the repairs.